Video Network Equipment

Imagin Channel Plus

91-1281-0, Mod #5435, 3-Channel RF-Video Modular
Mod #5435 ChannelPlus

The Model 5435 Three-channel RF-Video Modulator converts three video and stereo audio inputs to three programmable TV channels (stereo audio is converted to monaural audio after modulation). The Model 5435 modulator offers video loop-through. Jumpers located on the back of the Model 5435 terminate the video inputs at 75 ohms. When a jumper is removed, the input can be looped using a "Y" adapter to feed the video to a local monitor or VCR.

Features:

  • Three modulated TV channels
  • Creates TV channels for cameras or other video sources
  • Channel range: CATV 65-125 (excluding 95-99) and UHF 14-64
  • Pushbutton digital programming of modulated channels
  • Compatible with DA-8200 and DA-550 series distribution amplifiers
  • 7.9" W x 1.5" H x 5.5" D

Other Models:
91-1281-2, Mod #5435, 1-Channel RF-Video Modular
Mod #5435 ChannelPlus
91-1281-3, Mod #5435, 2-Channel RF-Video Modular
Mod #5435 ChannelPlus
91-1281-4, Mod #5435, 3-Channel RF-Video Modular
Mod #5435 ChannelPlus

550HHR_ChannelPlus

91-1284-1, 3-Input/8 Output RF-Video Distribution Amplifier
Mod #550HHR ChannelPlus
91-1283-1, Low Pass Filter, Blocks Cable Signals > Ch. 105

The Model DA-550HHR High-headroom RF Distribution Amplifier with 12-Volt IR is the heart of a multi-room distribution system with outputs to eight televisions with coax runs up to 150 feet. The Model DA-550HHR has three inputs, one from off-air antenna or CATV and two from ChannelPlus 5400, 5500, or SVM series modulators. The DA-550HHR is used with antenna applications for off-air digital and NTSC signals.

Features:

  • 54 MHz to 1 GHz forward bandwidth
  • 3 dB nominal gain on TV outputs
  • Maximum input level 20 dBmv
  • Can be used in locations without electrical access and powered remotely with a ChannelPlus modulator or the Model 2010 wall plate
  • 6.5" W x 1.25" H x 4.5" D
imagin_conglom-01.jpg

91-1253, IR Receiver with Stereo Jack
Mod #291-80 CFL
91-1253-2, IR Receiver with RJ11 Connector
Mod #291-80 CFL
91-1255, IR Dual Emitter
91-1039-1, FP/IR Mounting Plate & 110 Type Keystone/R11

291-80 CFL Friendly IR Receiver:
This version of the 291 has been specifically designed to have great immunity to many sources of infrared interference and to have exceptional IR reception range. In particular, it has high rejection of IR interference generated by compact fluorescent lights (CFL) and will also operate in direct sunlight!

Specifications:

  • IR modulation frequency bandwidth: 30 – 60 kHz
  • Adjustable IR carrier frequency: 32 to 56 kHz (allows matching to actual component for optimum performance)
  • Normal reception range: > 70 feet
imagin_550HHR_Multiplexer-01.jpg

98-1310, IR Multiplexer Replacement Kit with 4-Dual Emitter Outputs/5 RJ11 Conn. Strip and 500 mA Pwr Supply
98-1310-0, IR Multiplexer Replacement Kit with 1-Dual Emitter Outputs/5 RJ11 Conn. Strip and 500 mA Pwr Supply

Replace your old Insight Infrared Multiplexer Box with this IR Replacement Kit

imagin_Selector-01.jpg

91-1275-3, 4 to 1 Selector with IR Remote

4-1 A/V Selector with Remote

Connect up to four audio/video devices to your TV with this handy switch box. Both composite and S-Video jacks are provided to give you the flexibility in connection that you need. Plus, with the included remote, you can switch between sources from anywhere in the room.

imagin_Distribution_Amplifier-01.jpg

91-1275-5, 1 to 4 Video Distribution Amplifier

1-to-4 Video Distribution Amplifier

This amplifier distributes the signal to up to 4 different devices/locations and provides one S-video input and 4 S-video outputs. It also converts composite video input to S-video outputs. The 4 Way AV Distribution Amplifier connects up to four VCRs or TVs to the line-level stereo audio/video output-RCA jacks of one VCR or analog printer.

imagin_Sony_UP-25MD-01.jpg

91-1162-3, Video Color Printer, Sony UP-25MD
91-1169, Handheld Remote, Sony UP-25MD
91-1163-5, Foot-pedal, 1-Function, Sony UP-25MD
90-1013, UPC-21L Paper, Sony UP-25MD, 200/box

Sony UP-25MD Color Video Printer
The Sony UP-25MD color printer successfully combines high quality with affordable pricing. The UP-25MD prints near A6 color images in approximately 16 seconds, (using UPC-21S media). The printer's new compact design allows for easy integration with other video equipment. The UP-25MD is an ideal choice for the dental market, as well as, office or scientific lab applications.

Key features:

  • Superb Print Quality and Color Reproduction at 423 DPI Resolution
  • Compact size
  • High-Speed Printing, near A6 Size
  • Eight Frame Memory
  • Versatile Analog Video Inputs and Outputs
  • Convenient Remote Control Capability
  • RS-232C Interface
  • 2 or 4-Split Image Print Mode
  • Monitor Loop-Through for System Power Saving
  • World Wide Power and Video Capability
imagin_Mitsubishi_CP-910U-01.jpg

91-1149, Video Color Printer, Mitsubishi CP-910U

Mitsubishi CP-910U Color Video Printer

The Mitsubishi CP-910U Color Video Printer is a high-speed color printer for photo quality output in just 12 seconds! In a revolutionary new system, the ink sheet rolls feature built-in Color Imaging Chips that contain specific data about the media. The printer uses this information to accurately control color characteristics. As a result, the CP-910U delivers high-grade printing with even more stable picture quality. The Color Imaging Control Chip also monitors the amount of remaining ink sheets and can be set up to give you an audible warning.

Key Features Include:

  • Sublimation thermal transfer
  • Fastest printer in it's class, S size: 10 sec's, L size: 20 sec's
  • 256 gradations per color
  • 16.7 million display colors
  • Jam Free, roll paper type
  • 325 dpi thermal head resolution
  • Weighs 25 pounds
  • 8 Megabyte, 3 frame memory
  • S-video/composite video interface
  • Dimensions 11.1W x 6.0H x 15.8D in.